Revision as of 12:03, 15 February 2014

There, i fixed it.

What's this all about?

In the need of a TV furniture I decided not to pay a lot for any fancy sets...

I took the cheapest IKEA table available (LACK, about 3EUR).
Some simple tools i've used on the table...
Firstly i had to drill a hole (cables thru-hole gap so that i can press the ready table to the wall).
Paper filled board required drilling from both sides separately.
Then i had to fetch new mounting holes for the moved table legs.
The board is empty inside, so I had to install leg-mount supports.
Made of some wooden blocks, installed insite and the legs are screwed tightly now.
All four legs are fit well at this point. No need to finish-up the back side of the table as it will be pressed against a wall anyways.
The complete product - with the remaining piece of the original LACK table top glued in as a media shelf.